1. 準備工作 在安裝卷簾門控制器之前，需要進行一些準備工作。 確保您已經(jīng)購買到了適合您卷簾門型號的控制器，并檢查控制器的配件是否齊全。

　　Before installing the roller shutter door controller, some preparation work needs to be done first. Ensure that you have purchased a controller suitable for your roller shutter door model and check if the accessories of the controller are complete

　　2. 安裝位置選擇 選擇合適的安裝位置對于卷簾門控制器的正常運行關重要。 一般來說，控制器應安裝在離電源插座較近且便于操作的位置，同時要保證離地面高度合適，以免受到水汽等影響。

　　2. Choosing the appropriate installation location is crucial for the normal operation of the roller shutter door controller. Generally speaking, the controller should be installed in a position close to the power socket and easy to operate, while ensuring a suitable height from the ground to avoid the influence of moisture and other factors

　　3. 固定安裝 在確定好安裝位置后，將控制器固定在墻面或其他承載結構上。 使用螺絲刀或電鉆將控制器的安裝底座固定在墻面上，并確保固定牢固，不會出現(xiàn)松動或搖晃的情況。

　　3. After determining the installation position, fix the controller to the wall or other load-bearing structure. Use a screwdriver or electric drill to fix the mounting base of the controller to the wall and ensure it is firmly fixed without any looseness or shaking.

　　4. 連接電源 將卷簾門控制器與電源進行連接。 ，將控制器的電源線與家庭電源插座進行連接，確保連接穩(wěn)固。

　　4. Connect the power supply to the roller shutter door controller. Firstly, connect the power cord of the controller to the home power outlet to ensure a secure connection

　　5. 調試測試 安裝完成后，進行控制器的調試測試。

　　5. After the installation of debugging and testing is completed, proceed with the debugging and testing of the controller