Everyone who has used remote control roller shutter doors knows that they can be lowered or raised using remote control. What is the reason why pressing the remote control doesn't respond? Let's take a look at the Jinan roller shutter door manufacturer.

一般遙控不靈有幾種情況：

There are several situations where remote control is generally ineffective:

1、電池電量不足，更換電池即可。

1. The battery is low, just replace it.

2、遙控距離偏遠，或附近有無線電干擾，離卷簾門近點操作即可。

2. If the remote control distance is remote or there is radio interference nearby, it can be operated close to the rolling shutter door.

3、遙控器使用的年數久了，內部線路板有氧化現象，導致遙控器失靈，打開遙控器清理一下即可。

3. The remote control has been in use for several years, and there is oxidation on the internal circuit board, which causes the remote control to malfunction. Open the remote control and clean it up.

4、遙控器掉碼，這屬于產品質量問題，需要的廠家人員來操作。

4. The remote control has lost its code, which is a product quality issue and requires professional manufacturer personnel to operate.

5、遙控器前端中間有一個遙控亮點，看看亮點在使用的時候會不會亮，如果不亮的話證明遙控器壞了。也有可能是遙控器的亮燈處，被弄臟了，影響了遙控效果，可以用濕布擦一下，然后再嘗試一遍。

5. There is a remote control highlight in the middle of the front end of the remote control to see if it will light up during use. If it does not light up, it indicates that the remote control is broken. It is also possible that the light on the remote control is dirty, which affects the remote control effect. You can wipe it with a damp cloth and try again.

如果遙控卷簾門遙控鑰匙點擊操作按鍵時指示燈不亮，此情況只有兩種可能：電池沒電或者按鍵失效。更換新的遙控器電池重新嘗試操作，失靈問題解決證明是電池不足導致，失靈沒有解決就是按鍵失效。

If the indicator light does not light up when the remote control key of the roller shutter door clicks the operation button, there are only two possibilities: the battery is out of charge or the button is ineffective. Replace the remote control battery with a new one and try the operation again. If the malfunction problem is resolved, it proves to be caused by insufficient battery. If the malfunction is not resolved, it means the button is invalid.

這時候需要拆裝遙控器，把電池取下，將遙控器固定螺絲松解，隨后拆解遙控器，目的是將遙控器內的灰塵以及其它雜物清潔干凈。完成遙控器內部清潔后安裝好遙控器并裝上新電池，通常就能夠解決失靈問題。

At this point, it is necessary to disassemble the remote control, remove the battery, loosen the fixing screws of the remote control, and then disassemble the remote control to clean the dust and other debris inside the remote control. After completing the internal cleaning of the remote control, installing it and installing a new battery usually solves the problem of malfunction.

如果遙控卷簾門遙控鑰匙點擊操作按鍵時指示燈點亮但是卷簾門沒反應，此時應當將遙控器與接收器重新對碼。遙控器與接收器對碼正確的做法是查閱產品使用說明書，按照說明書的對碼步驟進行遙控器與接收器對碼。

If the indicator light illuminates when the remote control key of the roller shutter door clicks the operation button, but the roller shutter door does not respond, the remote control should be re coded with the receiver at this time. The correct way to code the remote control and receiver is to refer to the product manual and follow the code matching steps in the manual.

如果說完成遙控器與接收器對碼依舊無法控制卷簾門升降，小編不建議繼續自己找故障點并嘗試解決，應當請求產品售后服務技師協助處理。更多相關的內容就來我們網站http://www.bankrobot.cn咨詢吧！

If the remote control and receiver are still unable to control the lifting and lowering of the rolling shutter door after completing the code matching, I do not recommend continuing to find the fault point and try to solve it myself. I should request the assistance of the product after-sales service technician to handle it. For more relevant content, come to our website http://www.bankrobot.cn Consult!